Water Valves (WV)

iPolymer Water Valve (WV) is manufactured in two material choices: Polypropylene or PVDF. The valve has a spring return and is pneumatically actuated to open or close depending upon the model.The valve is compact and comes with four tapped holes on the base for ease of mounting.

Teflon Pneumatic Valve (TP)

Our iPolymer Teflon®Pneumatic Valve (TP Valve) features an all PTFE wetted surface design. The design is ideally suited for harsh chemical and corrosive media and environments.

Quick Dump Valves (QD)

Our Quick Dump ("QD") Valves are designed to rapidly drain process tanks. Constructed from high-purity polymers, which are selected to meet your application needs, our Quick Dump Valves are available in Polypropylene (POL) or Polyvinylidene Fluoride (PVDF). These valves are designed to be welded directly to the underside (bottom) of tanks.

Miniature Pneumatic Valve (MTV)

Our iPolymer MiniaturePneumatic Diaphragm Valves offer precisionperformance underextreme conditions.Offered as 2-Way and 3-Way Valves with four internal body configurations and three valve seat sealing methods, our iPolymer Miniature Pneumatic Diaphragm Valves are suitable for a wide range of ultra clean to highly corrosive media applications.

High Pressure Valve (HPV)

Our iPolymer High Pressure Diaphragm Valve (HPV) is designed for use in high purity water and aggressive chemical applications.

Drain Valve (DV)

The iPolymer Drain Valve (DV)is a large orifice valve capable of handling large volumes of corrosive fluids via an all nonmetallic wetted surface. For cost efficiency this valve is fabricated from PVC or Polypropylene. However, it is available in PVDF or PTFE, with Kalrez O-rings.

DI Water Valve (DI)

iPolymer DI Water Valves are perfect 2-Way Valves for wet benches and chemical process facilities where ultrapure water is required.

Chemical Resistant Valve (CR)

Chemical Resistant (CR) Valves offer chemical and corrosion control through a complete fluoroplastic design and construction. All wetted surfaces are manufactured from virgin PTFE. Pneumatic Actuator, Base and Bands are constructed from PVC, Polypropylene or PVDF. The polymer components selected for our iPolymer CR Valve line are specifically suited for use with ultrapure water, deionized water, solvents, chemicals and liquid flowing bio-matter.