Sampling Metered Valves (SMV)

Our iPolymer PTFE Sampling Metered Valve (SMV) is designed for use in high purity water and aggressive chemical applications.

PTFE Stopcock Valves(SC)

PTFE Precision Plug Valves(PPV)

Our iPolymer Pressure Relief Valve (PRV) is constructed with a 100% pure PTFE Valve Body and Valve Plug. The single O-Ring design allows user selection of EP, FKM (Viton Eq.) or FFKM (Kalrez Eq.) depending on the flowing media.

PTFE Metering Valves(MV)

iPolymer Metering Valves (MV) use a tapered plug-stem to give a fine adjustment to the flow in addition to a full, open, or positive shutoff position.Our Metering Valves come in two configurations: Straight Flow Pattern (standard) and Angled Flow Pattern (special). iPolymer Metering Valves are considered low pressure valves.

PTFE Check Valves(CV)

Our iPolymer Check Valve features all PTFE wetted surfaces for excellent performance in all high purity applications. Our PTFE design resists chemical corrosion and other elements within harsh process environments. iPolymer Check Valves are commonly found as backflow preventers in clean processes. They are a simple and ideal device where directional flow control is a must.

Manual PTFE Ball Valves(BV)

Our iPolymer Ball Valve features an all PTFE wetted surface design. The design is ideally suited for harsh chemical and corrosive media applications. Polytetrafluoroethylene (PTFE), commonly known by its popular E.I. DuPont trade name TEFLON®, is also well suited to clean room and deionized water applications.

Water Valves (WV)

iPolymer Water Valve (WV) is manufactured in two material choices: Polypropylene or PVDF. The valve has a spring return and is pneumatically actuated to open or close depending upon the model.The valve is compact and comes with four tapped holes on the base for ease of mounting.

Teflon Pneumatic Valve (TP)

Our iPolymer Teflon®Pneumatic Valve (TP Valve) features an all PTFE wetted surface design. The design is ideally suited for harsh chemical and corrosive media and environments.

Quick Dump Valves (QD)

Our Quick Dump ("QD") Valves are designed to rapidly drain process tanks. Constructed from high-purity polymers, which are selected to meet your application needs, our Quick Dump Valves are available in Polypropylene (POL) or Polyvinylidene Fluoride (PVDF). These valves are designed to be welded directly to the underside (bottom) of tanks.

Miniature Pneumatic Valve (MTV)

Our iPolymer MiniaturePneumatic Diaphragm Valves offer precisionperformance underextreme conditions.Offered as 2-Way and 3-Way Valves with four internal body configurations and three valve seat sealing methods, our iPolymer Miniature Pneumatic Diaphragm Valves are suitable for a wide range of ultra clean to highly corrosive media applications.

High Pressure Valve (HPV)

Our iPolymer High Pressure Diaphragm Valve (HPV) is designed for use in high purity water and aggressive chemical applications.

Drain Valve (DV)

The iPolymer Drain Valve (DV)is a large orifice valve capable of handling large volumes of corrosive fluids via an all nonmetallic wetted surface. For cost efficiency this valve is fabricated from PVC or Polypropylene. However, it is available in PVDF or PTFE, with Kalrez O-rings.

DI Water Valve (DI)

iPolymer DI Water Valves are perfect 2-Way Valves for wet benches and chemical process facilities where ultrapure water is required.

Chemical Resistant Valve (CR)

Chemical Resistant (CR) Valves offer chemical and corrosion control through a complete fluoroplastic design and construction. All wetted surfaces are manufactured from virgin PTFE. Pneumatic Actuator, Base and Bands are constructed from PVC, Polypropylene or PVDF. The polymer components selected for our iPolymer CR Valve line are specifically suited for use with ultrapure water, deionized water, solvents, chemicals and liquid flowing bio-matter.

PTFE Spray Guns

PTFE Sub-Miniature Solenoid Valves

Our iPolymer Sub-miniature Solenoid Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four internal body configurations and three seat sealing methods, our iPolymer Sub-miniature Solenoid Valves are suitable for a wide range of ultra clean to highly corrosive media applications.

PTFE Miniature Solenoid Valves

Our iPolymer Miniature Solenoid Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four internal body configurations and five seat sealing methods, our iPolymer Miniature Solenoid Valves are suitable for a wide range of ultra clean to highly corrosive media applications.

PTFE Check Valves(CV)

Our iPolymer Check Valve features all PTFE wetted surfaces for excellent performance in all high purity applications. Our PTFE design resists chemical corrosion and other elements within harsh process environments.

Pressure Relief Valve (PRV)

Our iPolymer Pressure Relief Valve (PRV) is constructed with a 100% pure PTFE Valve Body and Valve Plug. The single O-Ring design allows user selection of EP, FKM (Viton Eq.) or FFKM (Kalrez Eq.) depending on the flowing media.

Pressure Regulator (PRG)

Our iPolymer PTFE Pressure Regulator is designed for use in high purity water and aggressive chemical applications.

Dilution Drain Valve (DDV)

The Dilution Drain Valve is ideal for cooling and diluting solutions while draining. The valve is designed to shut off the drain automatically if the water flow is interrupted. The DDV fits tanks with 3/8”, 1/2” and 3/4” main drain ports.

Air Cylinders(AC)

iPolymer Air Cylinders are frequently used where splash-back or fumes from highly aggressive chemicals are prime considerations. Often used near corrosive chemicals these PVC, Polypropylene and PVDF cylinders are just the right answer for providing strength, durability and reliability in your severe service actuation application.